Full switchboard replacement
Everything out of the enclosure, every circuit identified and tested as it goes back on its own protective device, and a board labelled with what it actually feeds.
Whether you need one is covered in our guide. This is what the day looks like: how long the power is off, what gets found behind an old board, and what you are left with when it is back on.
What the work covers
From one safety switch added to a board that is full, to the whole thing out and replaced. Priced before anything starts.
Everything out of the enclosure, every circuit identified and tested as it goes back on its own protective device, and a board labelled with what it actually feeds.
Rewirable fuses out, breakers and RCBOs in. The old ones give no fault indication and rely on somebody having the right fuse wire at midnight.
Where the board has room and a sound earth, protection can go on the circuits most likely to hurt somebody without replacing the whole board.
Along the beachfront the enclosure is often the problem before the board is. Rusted hinges, a door that will not close, water in the bottom.
Common in boards of a certain era. It does not automatically stop an upgrade, it changes how the job is done, and you are told before anything is touched.
Solar, an EV charger or air conditioning all need capacity. Much cheaper to plan for once at the board than to retrofit three times.
Ceramic fuses, no safety switch, or a board with no room left on it? Ring and describe what you have got. Most of it can be sorted on the phone.
Why NextPoint
If the work is not right we come back and put it right at no charge. That covers our work, for as long as you own it.
One number, agreed before anything begins, with GST stated. There is no call out fee, so a look at the board costs you nothing.
Most old boards are labelled from memory. Yours goes back with each circuit identified and marked with what it really feeds.
Registered electrical contractor REC 346464. Whoever turns up is licensed, insured and working to the same standard.
Every board we replace is tested circuit by circuit, labelled properly, and covered by our lifetime workmanship warranty.
How we work
What is on the board now, how old the house is, and what you are planning to add. Most switchboard jobs can be priced from that.
We look at the board, the meter box and the earth before anything comes out. If it is different from expected, you hear the new price first.
Power off for the day in most houses. Every circuit identified and tested as it goes back on. Anything we find gets shown to you, not quietly reconnected.
Paperwork that says the work was tested, and a board you can read at nine at night. Covered by our lifetime workmanship warranty.
On every job, no exceptions
We come out, look at it and price it. That visit costs you nothing.
One number, agreed before anything begins, GST stated. It does not move.
If our work is not right we come back and put it right at no charge. No expiry.
5.0 across 49 Google reviews
Published on our Google Business Profile and reproduced word for word. Google does not record which job a review is about, so these are general rather than specific to switchboard work.
I had an absolute 5 star experience with Luke from NextPoint Electrics. After trying for many years to get my House Switchboard replaced and upgraded, when most other electricians either wouldn't do the work or quoted silly money because it was so involved... Finally I found an experienced and professional Sparky. Reasonably priced, excellent workmanship. I cannot recommend him more highly enough. One very happy customer!
Absolutely terrific to work with. Luke's professional manner coupled with friendliness, all the while keeping us updated on progress. Have no hesitation in recommending Luke.
Luke at NextPoint was fantastic. Arrived on time both times he's done work, texted first to say he was on his way. Very quick, efficient and tidy with both jobs and a great guy to deal with. Highly recommend and will definitely use him again.
Switchboard questions
Plan for a working day. Some boards are quicker and a few are slower, and the difference is usually what is found once the enclosure is open rather than the board itself. You will get a realistic estimate at quote stage, and if the day is going to run longer than expected you will hear it while there is still time to do something about the freezer.
Yes, and that is what most upgrades are. The board and the cabling are two separate questions. A new board gives you modern protection on the circuits you have. It does not change what those circuits are made of. Where the cable itself is the problem, that is rewiring, and it is a much larger job. Part of quoting an upgrade is telling you honestly which of the two you have.
Not automatically. It depends on whether the board has a spare protected way and whether the supply can carry the new load. Both get checked before you are quoted for the new circuit rather than after. Where an upgrade is genuinely needed first, you will be told why, and if you are planning several additions it is almost always cheaper to do the board once.
The short answer: a rewirable fuse protects the wiring from overload, which it does adequately, and it does nothing to protect a person from electric shock. A house on ceramic fuses is a house with no safety switches, and that is the gap worth closing, whether or not you replace the whole board today.
Yes, anywhere within a short drive of Ocean Grove, including the older housing through Drysdale and Ocean Grove, the acreage at Wallington and Wallington, and the timber housing stock through Queenscliff. The full list is on the service areas page.
Still deciding? Ring and tell us what you have got, and we will tell you what it needs.
Complementary services
Send us a photo of the board with the door open. That one photo answers most of the questions a quote depends on.